Top News

AC Safety Tips:A very painful news has come out from Vivek Vihar area of ​​Delhi, which has shocked people. A massive fire suddenly broke out in a house and destroyed everything within a few minutes. According to initial information, the cause of this accident is being said to be a blast in the air conditioner (AC). So far 9 people have lost their lives in this incident, while many others have sustained serious burns.

According to fire department officials, they received information about the fire at around 3:47 in the morning. As soon as the information was received, immediate action was taken and 14 fire engines were sent to the spot. After a lot of effort the fire was brought under control, but by then the damage had already been done. In the initial investigation, explosion in AC is being considered as the main cause of the fire.

Does AC become a threat in rising heat?

AC has become a necessity for every home during the summer season. But this accident has also made it clear that due to negligence or poor maintenance, this equipment can prove fatal. In such a situation, it is very important to understand what could be the reasons behind fire or explosion in AC and how they can be avoided.

Main reasons for AC fire

1. Electric short circuit

AC can become overheated if it runs continuously for a long time. If its wires are loose or of poor quality, the risk of short circuit increases. This short circuit often causes fire.
Prevention: Get the AC serviced from time to time and get the wiring checked by an experienced electrician.

2. Voltage fluctuations

Sudden changes in electrical voltage can be dangerous for the AC. Due to this, its internal parts may get damaged or burnt, which increases the risk of fire.
Prevention: Always install a good quality stabilizer with the AC so that the voltage remains controlled.

3. Accumulation of dust and dirt

There are many parts inside the AC, which are very important to keep clean. When dust and dirt accumulate in them, heat increases inside the machine and there is a risk of fire.
Prevention: It is very important to get the AC cleaned and serviced regularly.

4. Use of inferior parts

Many times, during AC repair, cheap and poor quality parts are installed. Such parts get damaged quickly and can cause fire.
Prevention: Always use reliable and original parts.

5. Improper installation and poor maintenance

If the AC is not installed properly or is not maintained properly, it can also become the cause of an accident. Wrong fitting done by the local mechanic sometimes increases the danger.
Precautions: Always get installation and service done by authorized technicians of the company.

This accident is like a warning as to how important it is to be careful while using technology. Small carelessness can turn into big accidents. Therefore, such dangers can be avoided by timely inspection, proper maintenance and vigilance.